產(chǎn)品中心
Li-ion Battery Both Side Coater
PNT的鋰電池極片涂布機適用了狹縫式(Slot Die)涂布，涂布精度和均勻性良好. 并 采用氣浮式和導輥式烘箱，不僅烘箱尺寸小、而且干燥效果好、發(fā)揮高運行速度.
PNT的鋰電池極片涂布機適用了狹縫式(Slot Die)涂布，涂布精度和均勻性良好。
并采用氣浮式和導輥式烘箱，不僅烘箱尺寸小、而且干燥效果好、發(fā)揮高運行速度。
| 項目 | 規(guī)格 |
|---|---|
| 基材 | 正極 : 鋁箔 負極 : 銅箔 |
| 厚度 | 正極 : 12 ~ 30? 負極 : 8 ~ 30? |
| 寬度 | Max. 1,280mm |
| 輥長 | Max. 1,500mm |
| 機速 | Max. 70m/min |
放卷徑 | 700mm |
收卷徑 | 900mm |
涂布方式 | 狹縫式（Slot Die ） |
涂布形式 | 間隔及條紋 |
烘箱 | 氣浮式及導輥傳片式 |
收卷方式 | 中心收卷 |
PNT's Lithium Ion Battery coating machine can control coating thickness more accurately and uniformly by using slot die coating system.
In addition, by applying air floating & roll supporting type to drying unit, it can coat stably and fast.
This machine also can control the slot die lip by receiving feed back from a densimeter.
| Description | General specification |
|---|---|
| Web Material | Al Foil Cu Foil |
| Web Thickness | AL: 12 ~ 30?Cu: 8 ~ 30? |
| Web Width | Max. 1,280mm |
| Roll Width | Max. 1,500mm |
| Coating Width | Max. 70m/min |
| Unwind Diameter | 700mm |
| Rewind Diameter | 900mm |
| Coating System | Slot Die Coating System |
| Coating Method | Intermittence & Stripe |
| Dryer Type | Air Floating &Roll Supporting Type |
| Winding System | Center Winding System |
